Engineering Chemistry II Syllabus

Engineering Chemistry II Syllabus

  1. Water and Its Treatment

    • Hardness of water: Causes, effects, and units of hardness
    • Determination of hardness by complexometric method
    • Water treatment methods: Ion exchange, reverse osmosis, and potable water treatment
    • Desalination processes

  2. Electrochemistry and Its Applications

    • Electrochemical cells and electrode potentials
    • Nernst equation and types of electrodes
    • Electrochemical series and its applications
    • Potentiometric titrations

  3. Corrosion and Its Control

    • Types and mechanisms of corrosion: Chemical and electrochemical
    • Factors affecting corrosion rate
    • Corrosion control methods: Cathodic protection, protective coatings, and inhibitors

  4. Fuels and Combustion

    • Classification and characteristics of fuels
    • Calorific value: Gross and net calorific values
    • Combustion calculations and air requirements
    • Alternative fuels: LPG, CNG, and biofuels

  5. Lubricants

    • Types and properties of lubricants
    • Mechanisms of lubrication
    • Characteristics of good lubricants
    • Applications and grading of lubricants

  6. Polymers and Composites

    • Classification and properties of polymers
    • Polymerization processes
    • Applications of polymers and composites in engineering

  7. Environmental Chemistry

    • Air and water pollution
    • Waste management and treatment
    • Green chemistry principles

  8. Laboratory Work

    • Practical experiments related to the above topics
    • Analytical techniques and instrumentation
    • Data analysis and report writing

Comments

Post a Comment

Popular posts from this blog

What scientific principles are applied in cars

Cars rely on a variety of scientific principles from multiple branches of science to function efficiently.  Here are some key scientific principles applied in cars: 1. Physics : Newton’s Laws of Motion : First law (Inertia): A car will remain at rest or in uniform motion unless acted on by an external force (e.g., braking, acceleration). Second law (Force and Acceleration): The force needed to accelerate a car is dependent on its mass and the acceleration required (F = ma). Third law (Action-Reaction): When the tires push against the ground, the ground pushes back with an equal force, propelling the car forward. Kinetic Energy and Potential Energy : Cars convert chemical energy in fuel into kinetic energy to move. When braking, kinetic energy is often transformed into heat through friction. Friction : Friction between the tires and the road surface is critical for controlling the car’s motion, while internal friction in the engine and mechanical components affects efficiency. Aerod...
Read more

Power Plant Engineering

syllabus for a Power Plant Engineering course: Unit I: Coal-Based Thermal Power Plants Rankine Cycle : Improvisations, layout of modern coal power plants Boilers : Supercritical boilers, Fluidized Bed Combustion (FBC) boilers Turbines and Condensers : Steam and heat rate Subsystems : Fuel and ash handling, draught system, feed water treatment Binary Cycles and Cogeneration Systems Unit II: Diesel, Gas Turbine, and Combined Cycle Power Plants Cycles : Otto, Diesel, Dual, and Brayton cycles Components : Diesel and gas turbine power plants Combined Cycle Power Plants : Integrated gasifier-based combined cycle systems Unit III: Nuclear Power Plants Basics of Nuclear Engineering Reactor Types : Boiling Water Reactor (BWR), Pressurized Water Reactor (PWR), CANada Deuterium-Uranium reactor (CANDU), Breeder, Gas Cooled, and Liquid Metal Cooled Reactors Safety Measures : For nuclear power plants Unit IV: Power from Renewable Energy Hydro Electric Power Plants : Classification, layout, and compo...
Read more

Mathematics for ML

Certainly, let's break down the key concepts in the image you provided. Linear Algebra:  * Vectors: These are arrays of numbers arranged in a column or row. They represent quantities with both magnitude and direction.  * Matrices: These are rectangular arrays of numbers. They are used to represent linear transformations and systems of equations.  * Norms: Norms measure the size or magnitude of a vector. Common norms include the L1 norm (sum of absolute values), L2 norm (Euclidean distance), and infinity norm (maximum absolute value).  * Subspaces: These are subsets of a vector space that are closed under addition and scalar multiplication. They are fundamental to understanding the structure of vector spaces.  * Projections: Projections are operations that map vectors onto a subspace. They are used in dimensionality reduction techniques like Principal Component Analysis (PCA).  * Singular Value Decomposition (SVD) and Eigenvalue Decomposition (EVD): These ar...
Read more